Talisien Free Standing Bath

The Talisien is our latest free standing, double-ended bathtub and, we believe, strongly representative of our characteristics as a manufacturer. It is unique, elegant and strikingly different, yet very functional. Ideal for relaxed single or shared bathing, it features a carefully sculptured back, which slopes at each end and gives a greater than usual depth that permits luxurious soaking.


The Talisien Free Standing Bath

The sculpted double ends of the Talisien make it perfectly suited for shared bathing, whilst the clean, asymmetric design lends itself to a wide range of interior designs, from traditional to contemporary settings.

Mixer taps can be wall-mounted or fitted to the rear bath rim, or the bath can be used with a free standing riser, as shown above. When fitted with wall-mounted or rim-mounted mixer taps, the Talisien permits the option of a manifold combined filler and overflow.

Access and fitting:

Turned on its side, the Talisien will pass through a standard door (typical door width 750mm / 29½″).

Taps and other controls should be mounted on the rear rim, keeping the sides clear to allow the bather(s) to recline comfortably. Alternatively, the bath can be used with wall-mounted taps/spouts or a free standing riser.

Unless there is a specific request to the contrary, the Talisien will normally be supplied with pre-drilled holes for the waste and overflow. Holes will not be pre-cut for taps or other fittings, because the best way to determine the precise placement of these items is to agree them on site, as a result of discussions between the customer and the installer.

The Talisien stands on four height-adjustable feet that are bonded to the bottom of the bath. Allowing an adjustment range of 50mm (2″), they are factory-fitted and set to spread the bath’s weight evenly. During installation on-site, great care must be taken if the feet are subsequently adjusted to accommodate a sloping or uneven floor. For security, stability and durability, it is essential that the whole of the bath’s weight rests squarely and evenly on the feet – and not at all on the body of the bath.

All bath dimensions and further details are provided in the Talisien Specification Sheet. (PDF.)

For more information about the Talisien luxury free standing bath, please call our customer services team.


External dimensions: 1820mm x 850mm / 72″ x 33½”
External height: 570mm / 22½”
Internal depth: 488mm / 19¼”

Capacity: 390 litres. (72 Imperial gallons / 86 US gallons.)

Full internal and external dimensions are shown on the Talisien Specification Sheet.

Material: FICORE®

Colour choice:

The Talisien double-ended bath tub can be supplied in any colour and, by special request, in any combination of colours. Cabuchon’s normal pricing allows the bath’s colour to be matched with that of any standard, established sanitaryware – as well as many previous standard sanitaryware colours. For a small extra charge, special colours can also be manufactured to match, for example, the base colour of stone or marble, or a particular fabric or paint. Cabuchon baths normally have a high gloss finish due to the inherent properties of FICORE® but, for an extra charge, the Talisien may be supplied with a matt finish or primed to allow special paint effects to be applied.

The Talisien is not suitable for the inclusion of a Hydrotherapy system.






Where did you hear about us?

By using this form you agree with the storage and handling of your data by this website.*

All fields marked * are required.